KONTROL INSTRUMENTS introduces the QS series Ultrasonic Thickness Gauges
including the QS3 "Easy-Gauge", QS5 B "Basic", QS5 DL "B + Data Logger",
QS5 E "B +Thru-Paint" and the QS5 DLE "B + Data Logger + Thru-Paint".
So whether you purchase the affordable, simple, and easy to use QS3 or our most
complete and advanced QS5 DLE with B-Scan, a powerful Data Logger and true
Thru-Paint measuring capabilities, your ultrasonic thickness measurement needs
are sure to be met.
Outstanding features common to all models are:
- A bright 128 x 64 pixel LCD with LED back light illumination and
contrast adjustment for clear viewing. - Touch-Sense front panel with sensitivity adjustment, no mechanical
parts for added durability and auto-pressure and auto-scrolling
recognition. - Automatic 1 point calibration (No-Cal key).
- The Q-key: Power On, Shutdown, and access "hidden" features such
as a material velocity quickly and easily. - 2 year limited warranty on the electronic unit with additional 1, 2, or
3 years extended warranty available.
QS5 B Basic Gauge with USB
interface and B-Scan that is suitable for
all standard ultrasonic thickness gauge
applications.
- Memory of up to 1000 readings(view
only). - Possibility of upgrading to a Data Logger
and or (*)Thru-Paint model with an online
license purchases.
Pulse-Echo
Thru-Paint (Multi-Echo or Echo-Echo)
Pulse-Echo Measuring Range
0.6-500mm / 0.025 - 19.999inch
Auto Cal (No Cal Key calibration)
1 point and 2 point calibration
On Screen Materials Velocity Chart
Coupling Level Indicator
Material Condition Analyzer
Graphic B-Scan Representations
Statistics
Min Value
Others (Differential, Percentage)
Alarms
Low
Others (High, Material Condition)
Data Logger
Capacity
PC Interface with USB Connection
demeq DataCenter Software
Model Upgrades with License
Firmware and Software Updates
2 Year Limited Warranty
QS5 DL Data Logger with powerful
tools to analyze test results, create
statistics and generate reports.
- Data Logger for up to 32000 readings
and graphical B-Scan representations. - USB connection to download to PC
using DataCenter software. - Possibility of upgrading to a Thru-Paint
model with the purchase of a Hi-Dump
transducer and an online license
purchase.
QS5 E Multi-Echo operates in standard
Pulse-Echo or in Echo-Echo or Thru-Paint
mode using Hi-Dump 5 MHz transducer.
- In Thru-Paint mode: resolution of 0.01mm
/ 0.00039inch, measuring range of 2.5mm
/ 0.098in to 25mm / 0.98in with a 0 to
2mm / 0.078in coating. - Possibility of upgrading to QS5 DLE with a
Data Logger for up to 32000 readings
and graphical B-Scan representations
that can all be sent to a PC using
DataCenter software.
QS5 DLE Data Logger and Thru-Paint.
Our most complete and advanced
portable gauge with B-Scan, a powerful
Data Logger, and Thru-Paint measuring
capabilities.
- Data Logger for up to 32000 readings
and B-Scan graphical representations. - Echo-Echo mode for Thru- Paint
measurements. - Real time scanning at 20Hz.
Accessories
- Specialty transducers
- Hi-Dump 5MHz transducer for Thru-Paint
- Couplant
- Calibration step blocks
QS3 "Easy-Gauge" suited for all
standard ultrasonic thickness gauge
applications with NO PC interface.
- Large 24mm / 0.94in digits.
- Auto calibration (No Cal key).
- Memory (view only) of up to 1000 readings.
- Low alarm.
QSV Specialty Velocity Gauge is a specialty
gauge used to measure material velocities in a
wide range materials including cast iron.
The QSV can also be used as a regular thickness
gauge with the same outstanding features as
the QS3.
TO BE LAUNCHED IN MARCH 2011
User's Manual
MEASURING PRINCIPLE:
Pulse-Echo / Echo-Echo
MEASURING RANGE:
*0.6 to 500mm / *0.025 to
19.999inch
*Depends on transducer and
material being measured
MEASURING RESOLUTION:
Up to 100mm, 0.0mm/ Up to
3.936, 0.001inch
From 100mm, 0.1mm/ From
3.936, 0.01inch
Temporary 0.010 to 9.999us,
0.001us
MEASURING UNITS
Millimeters (mm)
Inches (in)
Microseconds (us)
V-PATH CORRECTION:
Automatic
FLIGHT TIME & RESOLUTION:
1to 100us at 0.1us
MATERIALS VELOCITY RANGE:
100 to 19.999m/s
2in/us to 787in/us
VELOCITY RESOLUTION
1m/s
FREQUENCIES:
Selectable 4, 8 and 20Hz
EMISSIONS PULSE:
120V at 50Ohm
DISPLAY:
128 x 64 pixels graphic LCD
Contrast adjustment
Visible area 45 x 30mm / 1.77 x
1.18inch
Digit sizes selectable 12 or 24mm /
0.47 or 0.94inch
UNIT DIMENSIONS:
117mm / 4.60 inch, Height x
78.74mm / 3.10 inch, Length x
24mm / 0.94 inch, Width
WEIGHT:
300g / 10.58oz with 2AA batteries
WORKING TEMPERATURE:
-10°C to +50°C
14°F to 122°F
STORAGE TEMPERATURE:
-20°C to +60°C
-4°F to 140°F
FRONT PANEL:
Touch-Sense technology
No mechanical parts
Sensitivity adjustment
LANGUAGE SELECTION:
English
Portuguese
Spanish
TRANSDUCERS:
Dual crystal with Lemo type "00"
connectors
Frequencies 2, 5, 7 and 10MHz
5MHz standard
CALIBRATION:
Auto, No Cal key (1 point)
2 point
Materials velocity chart
COUPLING:
Coupling level indicator
MATERIALS CONDITION
ANALYZER:
Corrosion
Pitting
GAIN & TRIGGER:
Adjustable
MEMORY:
1000 readings, view only
32000 readings, send to PC
MEMORY CAPTURE MODES:
Auto
Manual
STATISTICAL DATA:
Minimum value
Differential mode
Percentage differential
Erase mode
ALARMS:
Low
High
Material condition analyzer
ALARMS TYPES:
Audible
Visible on display screen
Visible flashing back light
POWER SUPPLY:
2 AA 1.5v Alkaline or 2 AA 1.2v
NiCad
100 hours with back light off
AUTO SHUT DOWN:
Programmable 1 to 6 minutes
DATA OUTPUT
USB standard
RS232 (optional)
SOFTWARE & UPGRADES:
Software and firmware upgrades
Download from www.demeq.com
DataCenter software
MODEL LICENSE UPGRADES:
Available for purchase at
www.demeq.com
WARRANTY:
2 years limited
Additional 1, 2, or 3 years extended
warranty available
contact@kontrolinstruments.com
+1 (786) 463.6339
